Investment Casting

In-house finishing processes are Trimming, Shotblasting, Vibro-deburring, Anodizing and Vacuum Impregnation. We also have in-house mechanised washing machine & a dedicated leaktest machine for the castings to be leaktested. Subcontracted processes are Powder coating, Lacquering, & Chromotizing.

Fundamentally, a mold is produced by shaping a refractory material to form a cavity of a desired shape such that molten metal can be poured into the cavity. The mold cavity needs to retain its shape until the metal has solidified and the casting is removed. This sounds easy to accomplish, but depending on the choice of metal, certain characteristics are dema

In these systems, sand is mixed with one or two liquid resin components and a liquid catalyst component. As soon as the resin(s) and catalyst combine, a chemical reaction begins to take place that hardens (cures) the binder. The curing time can be lengthened or shortened based on the amount of catalyst used and the temperature of the refractory san

In-house finishing processes are Trimming, Shotblasting, Vibro-deburring, Anodizing and Vacuum Impregnation. We also have in-house mechanised washing machine & a dedicated leaktest machine for the castings to be leaktested. Subcontracted processes are Powder coating, Lacquering, & Chromotizing.

Fuerd Precision offers Flexibility (Prototypes, Small Quantity Runs - 5 to 25 pieces at a time and High Volume), Service (Quick Responsive Lead times, On time Performance, and Superior Investment Casting Engineering Support), Quality (Mechanical component parts produced that meet if not exceed your requirements), Reduce Cost, and Single Source Res