Fundamentally, a mold is produced by shaping a refractory material to form a cavity of a desired shape such that molten metal can be poured into the cavity. The mold cavity needs to retain its shape until the metal has solidified and the casting is removed. This sounds easy to accomplish, but depending on the choice of metal, certain characteristics are demanded of the mold.

Green Sand Molding

The most common method used to make metal castings is green sand molding. In this process, granular refractory sand is coated with a mixture of bentonite clay, water and, in some cases, other additives. The additives help to harden and hold the mold shape to withstand the pressures of the molten metal.

The green sand mixture is compacted through mechanical force or by hand around a pattern to create a mold. The mechanical force can be induced by slinging, jolting, squeezing or by impact/impulse.

The following points should be taken into account when considering the green sand molding process.