In these systems, sand is mixed with one or two liquid resin components and a liquid catalyst component. As soon as the resin(s) and catalyst combine, a chemical reaction begins to take place that hardens (cures) the binder. The curing time can be lengthened or shortened based on the amount of catalyst used and the temperature of the refractory sand.

The mixed sand is placed against the pattern or into the corebox. Although the sand mixtures have good flowability, some form of compaction (usually vibration) is used to provide densification of the sand in the mold/core. After a period of time, the core/mold has cured sufficiently to allow stripping from the corebox or pattern without distortion. The cores/molds are then allowed to sit and thoroughly cure. After curing, they can accept a refractory wash or coating that provides a better surface finish on the casting and protects the sand in the mold from the heat and erosive action of the molten metal as it enters the mold cavity.